; MDMZAPP.INF
; V.1.12
; Revised 11/16/2001 - Revised Hyundai H-100 and Synertek S200 models support
; connect speeds to allow up to 230400
; This is the INF file for modems supported using generic 
; Qualcomm DMSS 5000 command set information.  Specific models
; are moved to MDM*.INF when correct command set information is
; available. Thanks to all teams involved in the project.
; Copyright (c) 2001 Telemobil / NWO team.
[Version]
LayoutFile=layout.inf
Signature="$CHICAGO$"
Class=Modem
Provider=%MS%
DriverVer=1.02.b

[ControlFlags]
ExcludeFromSelect=UNIMODEM9F2BBC58,UNIMODEM8A085313,UNIMODEM901DD6E5
ExcludeFromSelect=*PNPC100,*PNPC101,*PNPC102,*PNPC103,*PNPC104,*PNPC105
ExcludeFromSelect=*PNPC106,*PNPC107,*PNPC108,*PNPC109,*PNPC10A,*PNPC10B
ExcludeFromSelect=*PNPC10C,*PNPC10D,*PNPC10E,*PNPC10F

; --------------------------------------------------
; Manufacturers

[Manufacturer]
%Zapp%=zapp

; --------------------------------------------------
; Driver sections

[zapp]
%Gen% = Gen, MDMGEN
%Genb%= Genb, MDMGEN

; --------------------------------------------------
; Generic modem install sections


[Gen]
AddReg=All, InitAdd1, GenericAddReg1, GenReg1, EXTERNAL

[Genb]
AddReg=All, InitAdd2, GenericAddReg2, GenReg2, EXTERNAL

; --------------------------------------------------
; Common AddReg sections

[All]
HKR,,FriendlyDriver,,Unimodem.vxd
HKR,,DevLoader,,*VCOMM
HKR,,ConfigDialog,,modemui.dll
HKR,,PortSubClass,1,02
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"

[EXTERNAL]
HKR,, DeviceType, 1, 01

[InitAdd1]
HKR, Init, 1,, "AT<cr>"
HKR, Init, 2,, "ATE1V1+CRM=1<cr>"

[InitAdd2]
HKR, Init, 1,, "AT&C2<cr>"
HKR, Init, 2,, "ATE1V1+CRM=1<cr>"

[GenericAddReg1]
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Answer, 1,, "ATA<cr>"
HKR, Hangup, 1,, "ATH<cr>"
HKR,, Reset,, "ATZ<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
;below done on purpose you would never dial pulse so if accidently set in dial
;properties this will resolve the issue
HKR, Settings, Pulse,, "T"
HKR, Settings, Tone,, "T"
;HKR, Settings, FlowControl_Hard,,                    "+IFC=2,2"
;HKR, Settings, FlowControl_Off,,                     "+IFC=0,0"
;HKR, Settings, FlowControl_Soft,,                    "+IFC=1,1"

HKR, Responses, "<cr>",        1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<lf>",        1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>OK<cr><lf>",          1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>",  1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>",        1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>",   1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>",     1, 02, 00, 00,c2,01,00, 00,00,00,00
HKR, Responses, "0<cr>",       1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK
HKR, Responses, "2<cr>",       1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING
HKR, Responses, "3<cr>",       1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
HKR, Responses, "4<cr>",       1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR
HKR, Responses, "6<cr>",       1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE
HKR, Responses, "7<cr>",       1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY
HKR, Responses, "8<cr>",       1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER
HKR, Responses, "OK",          1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "RING",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO CARRIER",  1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "ERROR",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO DIALTONE", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO DIAL TONE",1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "BUSY",        1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO ANSWER",   1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "RINGING",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "CONNECT",     1, 02, 00, 00,c2,01,00, 00,00,00,00 
HKR, Responses, "1<cr>",       1, 02, 00, 00,c2,01,00, 00,00,00,00

;---------------------------------------------------

[GenericAddReg2]
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Answer, 1,, "ATA<cr>"
HKR, Hangup, 1,, "ATH<cr>"
HKR,, Reset,, "AT<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
;below done on purpose you would never dial pulse so if accidently set in dial
;properties this will resolve the issue
HKR, Settings, Pulse,, "T"
HKR, Settings, Tone,, "T"

HKR, Responses, "<cr>",        1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<lf>",        1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>OK<cr><lf>",          1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>",  1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>",        1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>",   1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>",     1, 02, 00, 00,84,03,00, 00,00,00,00
HKR, Responses, "0<cr>",       1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK
HKR, Responses, "2<cr>",       1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING
HKR, Responses, "3<cr>",       1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
HKR, Responses, "4<cr>",       1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR
HKR, Responses, "6<cr>",       1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE
HKR, Responses, "7<cr>",       1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY
HKR, Responses, "8<cr>",       1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER
HKR, Responses, "OK",          1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "RING",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO CARRIER",  1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "ERROR",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO DIALTONE", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO DIAL TONE",1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "BUSY",        1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO ANSWER",   1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "RINGING",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "CONNECT",     1, 02, 00, 00,84,03,00, 00,00,00,00 
HKR, Responses, "1<cr>",       1, 02, 00, 00,84,03,00, 00,00,00,00

; --------------------------------------------------
; Model AddReg sections

[GenReg1]
HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,c2,01,00, 00,c2,01,00
HKR,, DCB, 1, 1C,00,00,00, 00,c2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00

[GenReg2]
HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,84,03,00, 00,F4,01,00
HKR,, DCB, 1, 1C,00,00,00, 00,84,03,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00

; --------------------------------------------------
[Strings]
ClassName="Modem"
MS="Microsoft"

zapp = "zapp"
Gen = "Zapp CDMA Handset (Standard 115k serial port)"
Genb= "Zapp CDMA Handset (With USB 230k serial conv)"