Connect a Zapp Handset to MAC

# Setting the speed of your high speed modem included in your Zapp Handset

Hyundai H1-00 Handset
press menu
press 7
press 3
select 230400 using up/down arrows
press select
press [END] button
The Zapp modem speed is now set to 230400bps.

Synertek S200 handset
press menu button
press 6 (Network)
press 2 (Computer Speed)
select 230400 using up/down arrows
press menu button when 230400 is selected

The Zapp modem speed is now set to 230400bps.

# Installing the USB Interface 
Install ATEN USB to Serial Adapter
You may connect your Zapp Handset to USB port using a Zapp Serial Data Cable and a standard USB to Serial Adapter. Here is an example with the USB Adapter manufactured by ATEN Technologies ( http://www.aten-usa.com/ )
Connect  Zapp Serial Data Cable to the mobile device. Connect Zapp Serial Data Cable to ATEN Adapter
Connect ATEN Adapter to a computer USB port
ATEN Adapter on Mac OS 9
ATEN USB to Serial Adapter is provided with it's own driver. 
You may also download it from: 
http://www.aten-usa.com/support/ 
http://www.zappmobile.ro/data/drivers/usb_to_serial_aten/UC232A/ 
Connect the USB end of the converter to USB port of your computer.
Cancel
Copy ATEN driver archive (for MAC OS) to your Hard Disk.
Unzip the archived file
Copy the unarchived file(s) to System Folder > Extensions
Restart your computer

# Zapp Modem (230Kbps) Installation
Insert Zapp CD 
Make a local copy of Zapp Modem Driver for MAC (archived files): (zappmode.hqx)
You will see a folder Named: ZAPPModemScripts-MAC
Copy the content of this folder to System Folder > Extensions > Modem Scripts
Open Control Panels > Modem
Connect via: Modem Port USB
Modem: Zappmobile230400
Dialing: Tone
Ignore dial tone [checked]
Close 
Save

# Configure Remote Access 
Open Control Panels > Remote Access
Registered user
Name: any
Pass: any
Save password
Number: #777

# TCP/IP Settings
Open Control Panels > TCP/IP
Connect via: PPP
Configure Using PPP Server
Close 
Save

# Setting your default browser:
Open Control Panels > Internet

Click on Web tab
Select the default browser (Netscape Communicator or Internet Explorer)